BM2 series

BM series cycloid hydraulic mo

当前位置：首页 >> BM series cycloid hydraulic mo

BM2 series

发布日期：[2015/1/17 15:33:07] 点击率：[4850] 来源：济宁力科液压有限责任公司

BM2 motor

BM2 series motor is a medium, spool valve type motor.can bear higher pressure than BM1.

Characteristic features：

l It adapts the gerolor design. Has higher efficiency than BM1 motor.

l Credible design for shaft seal , which can bear high pressure, and be used in parallel or in series.

l Direction of shaft speed can be controlled easily and smoothly.

l Best efficiency and economy in medium load applications.

Main Specification

Displacement		50	63	80	100	125	160	200	250	315	400	500
（ml/r)		50	63	80	100	125	160	200	250	315	400	500
（ml/r)

Ｆlow	Cont.	40	40	60	60	60	60	60	60	60	60	60
Ｆlow
(LPM)	Int..	50	50	75	75	75	75	75	75	75	75	75
	Int..	50	50	75	75	75	75	75	75	75	75	75

Speed	Cont.	755	630	750	600	475	375	300	240	190	160	110
Speed
(RPM)	Int..	970	790	940	750	600	470	375	300	240	200	128
	Int..	970	790	940	750	600	470	375	300	240	200	128

	Cont.	14	14	17.5	17.	17.5	16.5	13	11	8.5	8.5	8
Pressure	Cont.	14	14	17.5	5	17.5	16.5	13	11	8.5	8.5	8
Pressure					5
(MPa)	Int..	17.5	17.5	20	20	20	20	17.5	14	11.5	11.5	9
	Int..	17.5	17.5	20	20	20	20	17.5	14	11.5	11.5	9

Torque	Cont.	100	124	190	240	292	363	358	352	360	420	464
(N*m)
(N*m)	Int..	126	156	220	280	340	430	448	470	470	548	580
	Int..	126	156	220	280	340	430	448	470	470	548	580

Note: 1.Continuous data: The Max. Value of operating motor continuously. 2.Intermittent Data: The Max. Value of operating motor in 6 seconds per minute. 3.A simultaneous max. RPM and max. pressure is not recommended.

4.The Conversion Factors is on the page 4, consult it please

5.The optimum operating situation should be at the 1/3～2/3 of the continuous operating situation.

【打印此页】【顶部】【关闭】

上一篇:BM2W series 下一篇:BM1 series