BMT series

BM series cycloid hydraulic mo

当前位置：首页 >> BM series cycloid hydraulic mo

BMT series

发布日期：[2015/1/17 16:14:54] 点击率：[3751] 来源：济宁力科液压有限责任公司

BMT motor

BMT is a large volume disc valve ,high pressure motor, with radial ball-bearings design, and can bear greater load. Characteristic features：

l The motor can be used in high pressure and high torque lAdvanced design in disc distribution flow,which can provide

improved performance at low speed.

l The valve can automatically compensate for the wear, so the volumetric efficiency is high .

l Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications.

Main Specification

Displacement		250	315	400	500	630	800
（ml/r）		250	315	400	500	630	800
（ml/r）

Flow	cont.	125	125	125	125	125	125
Flow
(LPM)	int.	150	150	150	150	150	150
	int.	150	150	150	150	150	150

Speed	cont.	495	380	302	237	196	154
Speed
（RPM)	int.	592	458	364	284	233	185
	int.	592	458	364	284	233	185

Pressure	cont.	20	20	18	16	14	12.5


(MPa)	int.	24	24	21	18	16	13
	int.	24	24	21	18	16	13

Torque	cont.	727	962	1095	1245	1318	1464
Torque
(N.m)	int.	888	1154	1269	1409	1498	1520
	int.	888	1154	1269	1409	1498	1520

Note: 1.Continuous data: The Max. Value of operating motor continuously. 2.Intermittent Data: The Max. Value of operating motor in 6 seconds per minute. 3.A simultaneous max. RPM and max. pressure is not recommended.

4.The Conversion Factors is on the page 4, consult it please

5.Optimum operating situation should be at the 1/3～2/3 of the continuous operating situation.

【打印此页】【顶部】【关闭】

上一篇:BMTS series 下一篇:BM6W series