BM4 series

BM series cycloid hydraulic mo

当前位置：首页 >> BM series cycloid hydraulic mo

BM4 series

发布日期：[2015/1/17 15:46:02] 点击率：[4403] 来源：济宁力科液压有限责任公司

BM4 motor

BM4 is a large spool valve ,high pressure motor,

with ralial ball-bearings design, and can bear greater load, Characteristic features：

l The motor can be used in high pressure and high torque lDouble taper roller bearings permit high radial loads. lCredible design for shaft seal , which can bear high pressure

Main Specification

Displacement		195	245	310	395	490	625	800
（ml/r）		195	245	310	395	490	625	800
（ml/r）

Flow	cont.	75	80	80	80	80	80	80
Flow
(LPM)	int.	100	100	100	100	100	100	100
	int.	100	100	100	100	100	100	100

Speed	cont.	390	320	250	200	156	120	100
（RPM)	int.	487	390	300	240	200	150	120
	int.	487	390	300	240	200	150	120
						, , , , ,
Pressure	cont.	14	14	14	14	14	12.5	10
Pressure
(MPa)	int.	17.5	15	15	15	15	13	12
	int.	17.5	15	15	15	15	13	12

Torque	cont.	400	435	554	697	870	998	1023
(N.m)	int.	510	502	663	798	1056	1178	1379
	int.	510	502	663	798	1056	1178	1379

Note: 1.Continuous data: The Max. Value of operating motor continuously. 2.Intermittent Data: The Max. Value of operating motor in 6 seconds per minute. 3.A simultaneous max. RPM and max. pressure is not recommended.

4.The Conversion Factors is on the page 4, consult it please

5.Optimum operating situation should be at the 1/3～2/3 of the continuous operating situation.

【打印此页】【顶部】【关闭】

上一篇:BM4W series 下一篇:BM3 series