HMM series

BM series cycloid hydraulic mo

当前位置：首页 >> BM series cycloid hydraulic mo

HMM series

发布日期：[2015/1/17 15:16:37] 点击率：[4228] 来源：济宁力科液压有限责任公司

HMM motor

HMM series motor is mini-motor with high speed, very compact design, spool valve,economical type motor.

Characteristic features：

l Compact design of spool and gear set, which provide mini volume, high power and low weight..

l Credible design for shaft seal , which can bear high pressure

and be used in parallel or in series.

l Direction of shaft rotation and speed can be controlled easily and smoothly.

Main Specification

Type		8	12.5	20	32	40	50

Displacement		8.2	12.9	19.9	31.6	39.8	50.3
（ml/r)		8.2	12.9	19.9	31.6	39.8	50.3
（ml/r)

Ｆlow	Cont.	16	20	20	20	20	20
Ｆlow
(LPM)	Int..	20	25	25	25	25	25
	Int..	20	25	25	25	25	25

Speed	Cont.	1950	1550	1000	630	500	400
Speed
(RPM)	Int..	2450	1940	1250	800	630	500
	Int..	2450	1940	1250	800	630	500

Pressure	Cont.	10	10	10	10	9	7
Pressure
(MPa)	Int..	14	14	14	14	14	14
	Int..	14	14	14	14	14	14

Torque	Cont.	11	16	25	40	45	46
Torque
(N*m)	Int..	15	23	35	57	70	88
	Int..	15	23	35	57	70	88

Note: 1.Continuous data: The Max. Value of operating motor continuously. 2.Intermittent Data: The Max. Value of operating motor in 6 seconds per minute. 3.A simultaneous max. RPM and max. pressure is not recommended.

4.The Conversion Factors is on the page 4, consult it please

5.Optimum operating situation should be at the 1/3～2/3 of the continuous operating situation.

【打印此页】【顶部】【关闭】

上一篇:BM1 series