BM1 series

BM series cycloid hydraulic mo

当前位置：首页 >> BM series cycloid hydraulic mo

BM1 series

发布日期：[2015/1/17 15:31:15] 点击率：[4665] 来源：济宁力科液压有限责任公司

BM1 motor

BM1 series motor is a small volume, spool valve,economical type motor. Characteristic features：

l Compact design of spool and gear set, which provide small volume, high power and low weight..

l Credible design for shaft seal , which can bear high pressure and be used in parallel or in series.

l Direction of shaft rotation and speed can be controlled easily and smoothly.

l Best combination of efficiency and economy in medium load applications.

Main Specification

Displacement		50	63	80	100	125	160	200	250	315	400
（ml/r)

Ｆlow	Cont.	45	45	60	60	60	60	60	60	60	60


(LPM)	Int..	50	50	75	75	75	75	75	75	75	75

Speed	Cont.	879	720	740	589	475	370	296	237	189	149
Speed
(RPM)	Int..	975	755	827	673	594	463	370	297	236	185
	Int..	975	755	827	673	594	463	370	297	236	185

Pressure	Cont.	12.5	12.5	12.5	12.5	12.5	12.5	11	11	10	8.5
Pressure
(MPa)	Int..	16.5	16.5	16.5	16.5	16.5	16.5	16.5	14	12.5	10.5
	Int..	16.5	16.5	16.5	16.5	16.5	16.5	16.5	14	12.5	10.5

Torque	Cont.	81	101	129	161	202	245	286	360	406	435
Torque
(N*m)	Int..	108	134	171	213	268	342	390	456	505	533
	Int..	108	134	171	213	268	342	390	456	505	533

Note: 1.Continuous data: The Max. Value of operating motor continuously. 2.Intermittent Data: The Max. Value of operating motor in 6 seconds per minute. 3.A simultaneous max. RPM and max. pressure is not recommended.

4.The Conversion Factors is on the page 4, consult it please

5.Optimum operating situation should be at the 1/3～2/3 of the continuous operating situation.

【打印此页】【顶部】【关闭】

上一篇:BM2 series 下一篇:HMM series