BM6 series

BM series cycloid hydraulic mo

当前位置：首页 >> BM series cycloid hydraulic mo

BM6 series

发布日期：[2015/1/17 15:53:45] 点击率：[4346] 来源：济宁力科液压有限责任公司

BM6 motor

BM6 is a large volume,disc valve ,high pressure motor, with ralial ball-bearings design, and can bear greater load, and has higher torque than BM5.

Characteristic features：

l The motor can be used in high pressure, so it’s max. torque is higher than BM5 motor.

l Advanced design in disc distribution flow, which can provide improved performance at low speed.

l The valve can automatically compensate for the wear, so the volumetric efficiency is high .

l Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications.

Main Specification

Displacement		195	245	310	395	490		625	800	985
（ml/r)		195	245	310	395	490		625	800	985
（ml/r)

Flow	Cont.	150	150	150	150	150		150	150	150
(LPM)
(LPM)	Int..	170	210	225	225	225		225	225	225
	Int..	170	210	225	225	225		225	225	225

Speed	Cont.	775	615	485	383	307		241	184	153
(RPM)
(RPM)	Int..	866	834	698	563	454		355	276	230
	Int..	866	834	698	563	454		355	276	230

Pressure	Cont.	20.5	20.5	20.5	20.5	17		14	12	12
(MPa)
(MPa)	Int..	31	31	31	31	27.5		17	14	14
	Int..	31	31	31	31	27.5		17	14	14

Torque	Cont.	575	735	930	1169	1215		1330	1380	1570
Note: 1.Continuous		data: The Max. Value of operating motor				continuously.
(N*m)	Int..	860	1180	1335	1655	1885		1380	1650	1875
2.Intermittent		Data: The Max. Value of operating motor				in 6 seconds	per minute.

3.A simultaneous max. RPM and max. pressure is not recommended. 4.The Conversion Factors is on the page 4, consult it please

5.Optimum operating situation should be at the 1/3～2/3 of the continuous operating situation.

【打印此页】【顶部】【关闭】

上一篇:BM6S series 下一篇:BM5S series